10A Standard PWM regulator - £24.99
Fully fitted from: - Please Call For Details
100% Brand new and high quality.
Can be used for all panels.
Short and Open Circuit protection.
Full specification available if required.
Fail Safe and cannot be damaged by accidental wiring mistakes.
Advanced design with simple plug and play technology. No need for complicated adjustments.
Full LED status indication: State of Charge(SOC) Red-Flat Battery: Amber-Low charge: Green- good charge: Green Flashing- Full Charge.
Rated charge current: 10A
Rated load current:10A
Work voltage □12v; □12/24V Auto
Over load, short circuit protection: 1.25 rated load current 60sec, 1.5 rated loads current 5sec, over load protection action. ≥3 Rated load current short circuit protection action.
No load current ≤6mA
Charging circuit voltage drop ≤0.26 V
Load circuit voltage drop ≤0.15 V
Over voltage protection 17V; ×2/24V
Work temperature Industry stage：-35℃ to +55℃；
Boost charge voltage: 14.6V；×2/24V； (keep 10min)
Direct charge voltage: 14.4V; ×2/24V； (keep 10min)
Float charge voltage: 13.6V; ×2/24V；
charge return voltage: 13.2v;×2/24V；
Temperature compensation: -5mv/℃/cell (Boost charge, Direct charge, Float charge, charge return voltage);
Lower voltage indicate: 12.0V； ×2/24V；
Over discharge voltage: 11.1V（no load）- real-time modified voltage by the discharge rate； ×2/24V；
Over discharge return voltage: 12.6V; ×2/24V
Control mode: PWM charge mode; modified discharge voltage by the discharge rate
Item size: 140*88*25mm